The secret for you to make the simplest way to perforate a leather belt at home

The leather material possesses quite high durability and luxurious appearance, so it is very popular with people to use to make belts. But if after a while using the belt does not fit your waistline, what to do? That will be solved quite quickly, without taking too much of your time and effort if you properly apply the skin belt punch methods at home below.

Things to keep in mind before punching leather belts at home

Although the way to punch a leather belt at home is done quite simply, it requires precision and correct technique. Because just 1 small mistake, you will lose the inherent aesthetics of the belt, thereby leading to the risk of buying new products. So before performing this stage, everyone needs to pay close attention to the following issues:

Determine the right size accordingly

Touching too many holes in the belt will make them crinkly, losing their aesthetics. Therefore, everyone needs to pay attention and determine the exact size and waist length suitable for their waist to proceed with the correct perforation.

The way to determine the size is also quite simple, you just need to measure your waist with an old belt. Then use a pen to mark the points that need to be punched to ensure the most accurate process.

Choosing the right perforator

Choosing the right tool will make punching the waist simpler

Without the help of skin punching tools, you will not be able to perform this stage. Because not any tool can perforate the leather belt, because this material is quite thick and hard. So when choosing the wrong tool, it will not bring the result you want, on the contrary, it is easy to damage the belt. Therefore, before you perform this stage, it is necessary to prepare tools such as nails, punching pliers.

A few notes when punching holes for belts at home

Revealing simple, highly effective ways to perforate leather belts at home

To solve the difficult problem of how to punch holes for leather belts, you can refer to the following ways such as:

How to punch a leather belt hole at home with nails

Perforating for belts at home with nails

The process of performing perforation of the leather belt with nails is quite easy, only the following steps are needed:

• Step 1: Prepare nails similar in diameter to the old waist hole, soft towel, hammer closed.

• Step 2: Proceed to measure the size of your waist and mark exactly where you need to punch more holes in your waist.

• Step 3: Everyone will place the belt on a flat surface, then use heavy objects on the 2 ends to hold them in place.

• Step 4: Then put the nail in the correct position that was previously marked and then use the hammer to knock continuously to punch holes for the belt. One trick to getting this done faster is before the nail chisel needs to be heated, which also makes the hole smoother.

• Step 5: After punching the hole outside, you will use a soft cloth prepared in advance to wipe the waist to be able to use normally.

How to punch a belt hole with pliers

Perforating for belts at home with pliers

If you punch holes in accordance with the manufacturer's design, then apply a leather belt punch at home with 1 pair of leather nippers. This method is also quite simple with the following steps:

• Step 1: People will also measure the waist circumference and mark the location to be punched in the leather belt.

• Step 2: Then leave the belt in place and place the punching pliers in the marked position.

• Step 3: Tighten the 2 handles of the pliers together and then perform decisive operations so that the pliers can puncture through the skin of the belt. If the belt is too thick, squeeze harder to easily puncture the punch hole.

• Step 4: After pressing, gently release the hand to squeeze the pliers and slowly remove the pliers from the belt, and that's it.

How to perforate a leather belt at home with an electric drill

Perforating the belt at home with a drill

In addition to items such as pliers, nails you can punch the waist hole with an electric drill is very convenient and fast. In particular, this process both helps the punch hole more aesthetically pleasing, high accuracy without affecting the quality of your belt. When performing perforation with an electric drill you can operate with the following steps:

• Step 1: Prepare support tools such as clean soft towels, electric drills with sharp or prison drills.

• Step 2: Measure the belt and determine the correct position where the punching needs to be performed.

• Step 3: Choose the right size of electric drill bits so that they best fit the old waist hole, to create harmony and add aesthetics to the product.

• Step 4: You will press tightly and slowly with the drill at the marked location. People should not drill too deep, so it will be more difficult to take the drill bit out after doing it.

• Step 5: After completing the punching, you will use 1 soft towel to wipe it clean and finish.

What you need to keep in mind when performing ways to perforate leather belts at home

After performing 1 of the 3 ways to perforate the leather belt at home just shared above, use it to see if it fits. Check the install button to see if the hole is suitable, if the hole is small or the surface is rough after installing the lock people can use scissors to cut it back. This both makes difficult installation simpler and increases the aesthetics of the product. But to complete the perforation process for the belt well, you need to pay attention to the following issues:

• After perforating, it is necessary to hang the waistband straight instead of folding it so that the shape of the hole just perforated is not deformed.

• After the punching is complete, people can use a specialized skin polisher and apply it around the punch hole site to ensure the original beauty. Doing so will also increase the durability of your belt.

• During the procedure, people should absolutely not leave the belt on the ground or places with too intense sunlight. Because this may cause the product to peel, easily brittle hard, causing loss of the original belt shape.

What you need to keep in mind when punching holes for belts at home

Should or should not a skin belt punch be performed at home?

The question of whether or not to do the skin back punching at home is always a question that users ask. Although performing the punching yourself will help you soon be able to use the belt. However, when conducting lumbar skin punching at home, it requires technical factors and high meticulousness. Because this implementation process always finds a lot of possible risks, it needs to be manipulated correctly. Because just 1 small negligence can cause your leather belt to be damaged, or lose aesthetics.

Therefore, to avoid this situation, when buying a leather belt, you should try it on first and ask the seller to punch 1-2 more holes before and after the position that fits the waist. That way, even if you get fat or sick, you can still use the leather belt without worrying about punching more holes.

The secret to keeping your belt as beautiful as new

For gentlemen, the belt is considered an indispensable "companion" in life. Because the presence of this accessory will increase your elegance and luxury. Therefore, it is quite important to keep the belt as beautiful as new, so please bag yourself the tips below!

Use with caution

To ensure the most convenient and suitable use of the belt for you, you need to choose the right product with a size that fits your waist. When perforating, it is necessary to measure the size carefully and accurately so that later there are not too many holes in the belt. Because when punched too much, they will damage the leather material, easily peel and lose aesthetics. For leather belts, after use, people need to hang upright so as not to wrinkle the skin background to affect the shape of the product.

Regular cleaning, proper cleaning

Regularly clean, refresh the belt so that the product does not get dirty, causing damage to the leather material. Therefore, you need to pay attention to lumbar care after use, it is best to clean the product every week and nourish the skin every 1-2 months. The implementation of such cleaning of the product will add beauty and durability to the belt.

One thing you should keep in mind is that when cleaning, you must use a soft cotton towel to perform the process of drying again after cleaning and taking it away. For balm manipulation, you should use pine oil or fresh milk, wet the solution on cotton / soft towel to wipe gently. After that, remember to wipe it off with water and dry it thoroughly so that the product does not get damp causing mold, causing the belt to lose its inherent beauty. When the waist is moldy, people can treat it with alcohol-water in a ratio of 1:1, apply lightly on the skin and dry (in the sun not too harshly) to remove at the root.

Proper storage

For genuine leather belts, which are rarely used, it is necessary to properly preserve the product so that the product always retains its beauty and natural durability. Therefore, in any case such as perforating, or cleaning, people should absolutely not be tied under the ground/brick. Because moisture can cause mold to penetrate, damage the skin layer and make the product lose its inherent luxury beauty. In addition, when storing, it is also necessary to place the belt in a cool, dry place or you can insert more paper/moisture bag to prevent mold.

Share with you how to store belts effectively

We have just shared with you the ways to punch leather belts at home that are both simple and easy to perform and highly effective. Therefore, when encountering problems that need to be handled, everyone can immediately apply the above method and do not forget to focus on the point to note. If you need to learn more about other issues related to the use and preservation of leather materials, come to San Nguyen Leather. Or go directly to the website: www.dathuocsannguyen.com for more detailed advice and support.

CALL NOW – 0964.432.630

For advice on buying goods at the most preferential price